Recent Blog Posts

2014 Honda Odyssey Automatic Rear Tailgate Kit

by autosphere on 16 Nov 2017
Last week I installed an automatic open/close boot strut kit in our 2014 Honda Odyssey and have learnt a...

The importance of regular oil changes

by autosphere on 07 Feb 2014
  A couple of months ago, I purchased a car with an unknown service history from the auctions as we needed...
Motul 300V Chrono 10W-40 - 2 Litres
Motul 300V Chrono 10W-40
Racing lubricant for Motorsports with 100% Synthetic – EsterCore Technology

  • All racing gasoline or diesel engines, naturally aspirated or turbocharged fitted with injection (direct / indirect) or carburetted. 
  • For race prepared engines operating over a wide range of rpm and temperatures. 
  • Above existing Motorsport standards. 
  • Rally - GT - Short distance race 
The SAE 10W-40 viscosity allows excellent oil flow into the engine at start-up and fast oil pressure establishment while guaranteeing at hot temperature high oil pressure and faster engine revving. 
For decades MOTUL has developed high performance synthetic Ester based lubricants.  By selecting esters over other high performance synthetic base stocks and combining them with an innovative additive package, MOTUL has created a perfect synergy. This most advanced E Technology allows maximum power output of the engine without compromising reliability and wear. 
The SAE 10W-40 viscosity enables to compensate medium engine oil dilution by unburned fuel and maintains a stable oil pressure. Maximum oil film resistance at very high temperature: Engine wear is reduced. 
Friction Modifier: Maximum power output, decrease operating temperature. 
Low volatility: Oil consumption is reduced. 
High shear stability: Stable oil pressure whatever using conditions. 

For optimal engine performances avoid mixing with other synthetic or mineral lubricants. 
Oil Change: According to your own use. 
  • Viscosity grade SAE J 300 SAE 10W-40
  • Density at 20°C (68°F) ASTM D1298 0.866 
  • Viscosity at 40°C (104°F) ASTM D445 90.9 mm²/s 
  • Viscosity at 100°C (212°F) ASTM D445 13.9 mm²/s 
  • HTHS viscosity at 150°C (302°F) ASTM D4741 4.2 mPa.s 
  • Viscosity index ASTM D2270 156 
  • Pour point ASTM D97 -42°C / -43.6°F 
  • Flash point ASTM D92 230°C / 446.0°F 
  • TBN ASTM D2896 8.25 mg KOH/g

Currently there are no reviews for this product.

Currently there are no questions for this product.

Recently Viewed
Please click here to sign in or register.
Best Sellers
Shipping and Delivery | Terms and Conditions | Contact Us

© 2012 Copyright Autosphere All rights reserved
ABN: 56 505 887 515