Motul 8100 X-clean Gen2 5W-40 Synthetic Oil
- High performance 100% Synthetic lubricant approved by many car manufacturers.
- Specially designed for last generation cars, powered by Gasoline or Diesel engines, naturally aspirated or turbocharged, indirect or direct injection, Euro 4, 5 or 6 emission regulation compliant, requiring an ACEA C3 engine oil i.e. high HTHS (> 3.5 mPa.s) viscosity and “Mid SAPS” with reduced content of Sulfated Ash (≤ 0.8%), Phosphorus (0.07 ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%).
- Compatible with catalytic converters and Diesel Particulate Filters (DPF). Before use always refer to the owner manual or handbook of the vehicle.
Recommendations
HONDA, HYUNDAI, KIA, MITSUBISHI, NISSAN, SSANGYONG, SUZUKI
Engines compliant with Euro 4, 5 and 6 emission regulation are fitted with sensitive exhaust gas after treatment systems. Indeed, Sulfur and Phosphorus inhibit catalytic converters operation leading to inefficient exhaust gas treatment; and Sulfated Ashes clog DPFs leading to shorten regenerating cycle, quick oil aging, higher fuel consumption and engine power loss.
The ACEA C3 standard requests from the lubricant significant oil film resistance and low emission performance for powerful engines: MOTUL 8100 X-clean gen2 5W-40 has synthetic base stocks and dedicated SAPS levels that generates outstanding oil film resistance, reduces friction in the engine and provides after treatment devices compatibility. MOTUL 8100 X-clean gen2 5W-40 brings high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption. This type of lubricant achieves extended drain intervals managed by vehicles onboard computer.
Numerous OEMs such as KIA / HYUNDAI, HONDA, MITSUBISHI, NISSAN, SUZUKI, SSANGYONG,… recommend an ACEA C3 lubricant for most of their vehicles especially Diesels with DPF.
The BMW Long Life-04 specification imposes severe constraints to the lubricant particularly due to Valvetronic and after treatment systems compatibility. It covers all BMW engines from 2004 and also all BMW engines before 2004 as BMW LL-04 covers all the previous BMW specifications such as BMW LL-98 and BMW LL-01. ATTENTION: BMW LL-04 product can be used for gasoline engines only in European Union countries, Switzerland, Norway and Liechtenstein. Outside those countries, a BMW LL-01 lubricant such as MOTUL 8100 X-cess gen2 5W-40 is required. Refer to BMW recommendations when in doubt.
MOTUL 8100 X-clean gen2 5W-40 fulfils all the specifications of BMW Long Life-04 standard of the BMW Group for BMW, MINI and ROLLS-ROYCE vehicles with no exceptions i.e. for models before 2019 and after 2019. For models up to 2019, MOTUL 8100 X-clean 5W-40 can also be used.
GM-OPEL dexos2TM standard is suitable for the whole range of GM-OPEL Diesel engines (including DPF versions) and most of Gasoline engines from Model Year 2010. Also, GM-OPEL dexos2TM fully supersedes and replaces the previous GM specifications: GM-LL-A-025 (Gasoline) and GM-LL-B-025 (Diesel).
MERCEDES has developed MB 229.52 standard for all “BlueTEC” Diesel engines fitted with SCR (Selective Catalyst Reduction) systems using AdBlue® additive or so-called “diesel exhaust fluid”.
- MB 229.52 specification is fully backward compatible with MB 229.51 and MB 229.31 specifications for all Mercedes Diesel engines with or without DPF and some Gasoline engines.
- MB 229.52 standard also requires improved cold flow properties to allow fuel consumption reduction and therefore reduces greenhouse gases (CO2 ) emissions.
The Porsche C40 specification is extremely demanding for the lubricant in terms of oil film resistance and is particularly applicable to PORSCHE Gasoline engines with GPF (Gasoline Particulate Filter). Porsche C40 is not compatible with other PORSCHE standards such as Porsche A40, C30 or C20.
RENAULT has developed RN0700 and RN0710 standards for oils able to endure the most severe thermal constrains along with modern after treatment systems compatibility. The Renault RN0700 standard applies to all Naturally Aspirated Gasoline engines (except Renault Sport) of RENAULT Group (Renault, Dacia, Samsung).
- The RN0700 specification applies also to all RENAULT Diesel cars fitted with 1.5L dCi engines without DPF (Diesel Particulate Filter) having less than 100 hp output and 20 000 km or 1-year oil drain interval.
- The Renault RN0710 standard applies to all Turbocharged Gasoline, Renault Sport and Diesel without DPF engines of RENAULT Group (Renault, Dacia, Samsung).
- The RN0710 specification does not apply to RENAULT Diesel cars fitted with 1.5L dCi engines without DPF having less than 100 hp output and 20 000 km or 1-year oil drain interval which specifically require a RN0700 lubricant. For the 2,2L dCi with DPF, use only an approved RN0710 lubricant, not a RN0720.
The VW 511 00 specification provides very high shear resistance to cover some of the most demanding Gasoline engines of the VAG group (VW, Audi, Skoda, Seat), especially those fitted with Gasoline Particulate Filter (GPF). Caution: Do not use MOTUL 8100 X-clean gen2 5W-40 when a VW 504 00 or 507 00 lubricant is requested: in this case use MOTUL Specific 504 00 507 00 5W-30 / 0W-30 or MOTUL 8100 X-clean+ 5W-30.
The FIAT 9.55535-S2/T2 performance levels impose the engine oil to combine both ACEA C3 standard and 5W-40 viscosity grade in order to perfectly lubricate some Gasoline engines of FIAT, ALFA ROMEO and LANCIA produced from July 2007.
Recommendations
- Drain interval: according to manufacturers’ recommendations and tuned to your own use.
- Do not mix with lubricants not ACEA C3 compliant.
- Before use always refer to the owner manual or handbook of the vehicle
Properties
- Viscosity grade SAE J 300 5W-40 Density at 20°C (68°F) ASTM D1298 0.847
- Viscosity at 40°C (104°F) ASTM D445 77.1 mm²/s
- Viscosity at 100°C (212°F) ASTM D445 13.5 mm²/s
- HTHS viscosity at 150°C (302°F) ASTM D4741 3.9 mPa.s
- Viscosity Index ASTM D2270 180.0
- Pour point ASTM D97 -42.0 °C / -44.0 °F
- Sulfated Ash ASTM D874 0.80 % weight
- TBN ASTM D2896 8.0 mg KOH/g
- Flash point ASTM D92 230.0 °C / 446.0 °F